High Load Capacity Molded Grating – 1 1/2″ x 1″ x 2″ HLC

1 1/2" Thick | 48% Open

Request a Quote

Home
/
Our Products
/
PROGrid^® Molded FRP Grating
/
High Load Capacity Molded Grating – 1 1/2″ x 1″ x 2″ HLC

Check Inventory & Get a Quote

Product	Description	Part Number	Resin	Color	Length	Location	Quantity	UOM

Span (inches)	CONCENTRATED LOAD in lb/ft of width							Max Load (lb/ft)
Span (inches)	200	500	1000	2000	3000	4000	5000	Max Load (lb/ft)
18	<0.01	0.02	0.04	0.07	0.11	0.15	0.19	28,047
24	0.02	0.04	0.09	0.17	0.26	0.34	0.44	20,430
36	0.06	0.14	0.28					13,620
42	0.09	0.22	0.44					11,619

Span (inches)	UNIFORM LOAD in lb/ft²						Max Load (lb/ft²)
Span (inches)	200	400	500	600	700	800	Max Load (lb/ft²)
18	<0.01	0.01	0.02	0.02	0.02	0.03	36,000
24	0.02	0.04	0.05	0.06	0.08	0.09	20,390
36	0.10	0.21	0.26	0.31	0.37	0.42	8,814
42	0.19	0.39	0.48				6,550

Properties Per Foot of Width	# of Bars	Load Bar Width	Bar Centers	Weight/sq ft
A=7.2 in² I=1.35 in⁴ S=1.75³	12	T-.43 / B-.35	1″	6.21

1. Tables were developed in accordance with the test method developed by the Fiberglass Grating Manufacturers Council (FGMC) of the American Composites Manufacturers Association (ACMA) for the Fiberglass Grating Standard.

2. The designer should not exceed MAXIMUM RECOMMENDED load at any time. MAXIMUM LOAD represents a 4:1 factor of safety on ULTIMATE CAPACITY. ULTIMATE CAPACITY represents MAX LOAD observed at initial fracture.

3. Walking loads for maintenance traffic are typically a live load of 50 PSF. Deflections for worker comfort are typically limited to 0.375″ (3/8″) or SPAN divided by 120 under full live load. For a firmer feel under full live load or a line load 250 lb/ft of width, limit deflections to 0.25″ (1/4″) or SPAN divided by 200.

4. The loads represented are for STATIC LOAD CONDITIONS at ambient temperature. Deflections for impact loads or dynamic loads will MULTIPLY the deflections shown by 2. Long term loads will result in added deflection due to creep in the material and will require higher factors of safety to ensure acceptable performance.

5. Deflections are limited to 0.5″ (1/2″) as recommended by the Fiberglass Grating Manufacturers Council of the American Composites Manufacturers Association.

Technical illustration of 1 1/2 X 1 X 2 inch high load capacity structural fiberglass molded grating.